TEL: 86 10 8809 9016
MSN: gbstandard@hotmail.com
Chinese Standards Search  
 Chinese Version 
Order the standard:IEC
TEL: 86 10 88099016; FAX: 86 10 88097217; MSN: selina2ycx@hotmail.com
Home Page -- - -- A -- B -- C -- D -- E -- F -- G -- H -- I -- J -- K -- L -- M -- N -- O -- P -- Q -- R -- S -- T -- U -- V -- W -- X -- Y -- Z
No.

IEC  Standards:
1IEC 60812-1985  (Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA)
2IEC 60447-2004  (Basic and safety principles for man-machine interface, marking and identification - Actuating principles
3IEC 62104-2003  (Characteristics of DAB receivers
4IEC 61086-3-1-2004  (Coatings for loaded printed wire boards (conformal coatings) - Part 3-1: Specifications for individual materials - Coatings for general purpose (Class 1), high reliability (Class 2) and aerospace (Class 3
5IEC 60811-3-1 Corrigendum 1-1986  (Common test methods for insulating and sheathing materials of electric cables - Part 3 : Methods specific to PVC compounds - Section 1: Pressure test at high temperature - Tests for resistance to cracking; Corrigend
6IEC 60811-3-2 Corrigendum 1-1986  (Common test methods for insulating and sheathing materials of electric cables - Part 3 : Methods specific to PVC compounds - Section 2: Loss of mass test - Thermal stability test; Corrigendum 1
7IEC 61850-8-1-2004  (Communication networks and systems in substations - Part 8-1: Specific Communication Service Mapping (SCSM) - Mappings to MMS (ISO 9506-1 and ISO 9506-2) and to ISO/IEC 8802-3 .
8IEC 61850-9-1-2003  (Communication networks and systems in substations - Part 9-1: Specific communication service mapping (SCSM); Sampled values over serial unidirectional multidrop point to point link
9IEC 61238-1-2003  (Compression and mechanical connectors for power cables for rated voltages up to 30 kV (U<(Index)m>=36 kV) - Part 1: Test methods and requirements
10IEC 61076-2-103-2004  (Connectors for electronic equipment - Part 2-103: Circular connectors - Detail specification for a range of multipole connectors (type "XLR"
11IEC 61076-3-103-2003  (Connectors for electronic equipment - Part 3-103: Rectangular connectors - Detail specification for single row connectors with non-removable ribbon cable contacts on 1,25 mm pitch used for high speed serial data (HS
12IEC 61076-4-101 Corrigendum 1-2003  (Corrigendum 1 - Connectors for electronic equipment - Part 4-101: Printed board connectors with assessed quality; Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with
13IEC 61000-4-7 Corrigendum 1-2004  (Corrigendum 1 - Electromagnetic compatibility (EMC) - Part 4-7: Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply system
14IEC 60529 Edition 2.1 Corrigendum 1-2003  (Degrees of protection provided by enclosures (IP code
15IEC 61803 Corrigendum 1-1999  (Determination of power losses in high-voltage direct current (HVDC) converter stations
16IEC 61119-5-1993  (Digital audio tape cassette system (DAT); part 5: DAT for professional use
17IEC 60431 AMD 1-1995  (Dimensions of square cores (RM cores) made of magnetic oxides and associated parts; Amendment 1
18IEC 60431-1983  (Dimensions of square cores (RM-cores) made of magnetic oxides and associated parts
19IEC 60431 AMD 2-1996  (Dimensions of square cores (RM-cores) made of magnetic oxides and associated parts; Amendment 2
20IEC 62020 AMD 1-2003  (Electrical accessories - Residual current monitors for household and similar uses (RCMs); Amendment 1
21IEC 60216-6-2003  (Electrical insulating materials - Thermal endurance properties - Part 6: Determination of thermal endurance indices (TI and RTE) of an insulating material using the fixed time frame method .
22IEC 61000-2-12-2003  (Electromagnetic compatibility (EMC) - Part 2-12: Environment; Compatibility levels for low-frequency conducted disturbances and signalling in public medium-voltage power supply systems; Basic
23IEC 61000-3-3-1994  (Electromagnetic compatibility (EMC) - Part 3: Limits; section 3: Limitation of voltage fluctuations and flicker in low-voltage supply systems for equipment with rated current 16 A
24IEC 61000-3-2 Edition 2.1-2001  (Electromagnetic compatibility (EMC) - Part 3-2: Limits; Limits for harmonic current emissions (equipment input current 16 A per phase)
25IEC 61000-4-24-1997  (Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 24: Test methods for protective devices for
26IEC 61000-4-5 Corrigendum 1-1995  (Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 5: Surge immunity test
27IEC 61000-4-2-1995  (Electromagnetic compatibility (EMC) - Part 4: Testing and measuring techniques - Section 2: Electrostatic discharge immunity test - Basic EMC publication
28IEC 61000-4-21-2003  (Electromagnetic compatibility (EMC) - Part 4-21: Testing and measurement techniques; Reverberation chamber test methods
29IEC 61000-4-6 Edition 2.1-2004  (Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
30IEC 61000-4-6 AMD 1-2004  (Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields; Amendment 1
31IEC 61000-4-6-2003  (Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques; Immunity to conducted disturbances, induced by radio-frequency fields
32IEC 61000-5-5-1996  (Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 5: Specification of protective devices for HEMP conducted disturbance - Basic EMC
33IEC 61000-6-4-1997  (Electromagnetic compatibility (EMC) - Part 6: Generic standards - Section 4: Emission standard for industrial environments
34IEC 61000-6-6-2003  (Electromagnetic compatibility (EMC) - Part 6-6: Generic standards; HEMP immunity for indoor equipment
35IEC 62040-2-1999  (EMC
36IEC 61970-301-2003  (Energy management system application program interface (EMS-API) - Part 301: Common Information Model (CIM) Base .
37IEC 62358-2004  (Ferrite cores - Standard inductance factor (AL) and its tolerance .
38IEC 61804-2-2004  (Function blocks (FB) for process control - Part 2: Specification of FB concept and Electronic Device Description Language (EDDL) .
39IEC 61097-13-2003  (Global maritime distress and safety system (GMDSS) - Part 13: Inmarsat F77 ship earth station equipment; Operational and performance requirements, methods of testing and required test results
40IEC 60634-1993  (Heat test source (H.T.S.) lamps for carrying out heating tests on luminaires
41IEC 61016-1989  (Helical-scan digital component video cassette recording system using 19 mm magnetic tape (format D-1)
42IEC 60050-716-1-1995  (International Electrotechnical Vocabulary - Chapter 716-1: Integrated Services Digital Network (ISDN) - Part 1: General aspects
43IEC 60598-2-4-1997  (Luminaires - Part 2: Particular requirements - Section 4: Portable general purpose luminaires
44IEC 61108-4-2004  (Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 4: Shipborne DGPS and DGLONASS maritime radio beacon receiver equipment - Perfor
45IEC 60510-3-2-1980  (Methods of measurement for radio equipment used in satellite earth stations. Part 3: Methods of measurement on combinations of sub-systems. Section Two: Measurement of the figure of merit
46IEC 60489-4-1991  (Methods of measurement for radio equipment used in the mobile services; part 4: transmitters employing single-sideband emissions (R3E, H3E or J3E)
47IEC 60823-1990  (Microprocessor system bus (VMSbus); serial sub-system bus of the IEC 60821 bus (VMEbus)
48IEC 60127-4 AMD 1-2002  (Miniature fuses - Part 4: Universal Modular Fuse-links (UMF); Amendment 1
49IEC 60127-4 AMD 2-2003  (Miniature fuses - Part 4: Universal Modular Fuse-links (UMF); Amendment 2
50IEC 61595-2-1997  (Multichannel digital audio tape recorder (DATR), reel-to-reel system, for professional use - Part 2: Format B
51IEC 61041-5-1997  (Non-broadcast video tape recorders - Methods of measurement - Part 5: High-band video tape recorders, including those equipped with Y/C video connectors (NTSC/PAL
52IEC 61343-1996  (Nuclear reactor instrumentation - Boiling light water reactors (BWR) - Measurements in the reactor vessel for monitoring adequate cooling within the core
53IEC 61224-1993  (Nuclear reactors; response time in resistance temperature detectors (RTD); in situ measurements
54IEC 61221-2004  (Petroleum products and lubricants - Triaryl phosphate ester turbine control fluids (category ISO-L-TCD) - Specifications .
55IEC 61730-1-2004  (Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction .
56IEC 61730-2-2004  (Photovoltaic (PV) module safety qualification - Part 2: Requirements for testing .
57IEC 60502-1-2004  (Power cables with extruded insulation and their accessories for rated voltages from 1 kV (U<(Index)m> = 1,2 kV) up to 30 kV (U<(Index)m> = 36 kV) - Part 1: Cables for rated voltages of 1 kV (U<(Index)m> = 1,2 kV) and 3 kV (U<
58IEC 60169-10 AMD 2-1996  (Radio frequency connectors - Part 10: RF coaxial connectors with inner diameter of outer conductor 3 mm (0,12 in) with snap-on coupling - Characteristic impedance 50 ohms (type SMB)fenha
59IEC 60169-15 AMD 1-1996  (Radio frequency connectors - Part 15: RF coaxial connectors with inner diameter of outer conductor 4,13 mm (0,163 in) with screw coupling - Characteristic impedance 50 ohms (type SMA
60IEC 60169-16 AMD 1-1996  (Radio frequency connectors - Part 16: RF coaxial connectors with inner diameter of outer conductor 7 mm (0,276 in) with screw coupling - Characteristic impedance 50 ohms (75 ohms)(type
61IEC 60169-21 AMD 1-1996  (Radio frequency connectors - Part 21: Two types of radio-frequency connectors with inner diameter of outer conductor 9,5 mm (0,374 in) with different versions of screw coupling - Characterist
62IEC 61169-36-1996  (Radio frequency connectors - Part 36: Microminiature r.f. coaxial connectors with snap-on coupling - Characteristic impedance 50 ohms (type MCX)
63IEC 60169-8 AMD 1-1996  (Radio frequency connectors - Part 8: RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock - Characteristic impedance 50 ohms (type BNC)f
64IEC 60169-9 AMD 1-1996  (Radio frequency connectors - Part 9: RF coaxial connectors with inner diameter of outer conductor 3 mm (0,12 in) with screw coupling - Characteristic impedance 50 ohms (type SMC
65IEC 61196-2-1995  (Radio-frequency cables - Part 2: Sectional specification for semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation
66IEC 60169-10-1983  (Radio-frequency connectors. Part 10 : R.F. coaxial connectors with inner diameter of outer conductor 3 mm (0.12 in) with snap-on coupling - Characteristic impedance 50 Ohms (Type SBM
67IEC 60169-10 AMD 1-1986  (Radio-frequency connectors. Part 10 : R.F. coaxial connectors with inner diameter of outer conductor 3 mm (0.12 in) with snap-on coupling - Characteristic impedance 50 Ohms (Type SBM)
68IEC 60169-12-1979  (Radio-frequency connectors. Part 12 : R.F. coaxial connectors with screw coupling, unmatched (Type UHF)
69IEC 60169-15-1979  (Radio-frequency connectors. Part 15 : R.F. coaxial connectors with inner diameter of outer conductor 4.13mm(0.163 in) with screw coupling - Characteristic impedance 50 Ohms (Type SMA)
70IEC 60169-16-1982  (Radio-frequency connectors. Part 16 : R.F. coaxial connectors with inner diameter of outer conductor 7mm(0.276 in) with screw coupling - Characteristic impedance 50 Ohms (75 Ohms)(Type N)
71IEC 60169-17-1980  (Radio-frequency connectors. Part 17 : R.F. coaxial connectors with inner diameter of outer conductor 6.5mm(0.256 in) with screw coupling - Characteristic impedance 50 Ohms (Type TNC)
72IEC 60169-18-1985  (Radio-frequency connectors. Part 18 : R.F. coaxial connectors with inner diameter of outer conductor 2.79 mm (O.110 in) with screw coupling - Characteristic impedance 50 ohms (Type SSMA
73IEC 60169-19-1985  (Radio-frequency connectors. Part 19 : R.F coaxial connectors with inner diameter of outer conductor 2.08 mm (0.082 in) with snap coupling - Characteristic impedance 50 ohms (Type SSMB
74IEC 60169-19 Corrigendum 1-1995  (Radio-frequency connectors. Part 19 : R.F coaxial connectors with inner diameter of outer conductor 2.08 mm (0.082 in) with snap coupling - Characteristic impedance 50 ohms (Type SSMB)
75IEC 60169-20-1985  (Radio-frequency connectors. Part 20 : R.F. coaxial connectors with inner diameter of outer conductor 2.08 mm (0.082 in) with screw coupling - Characteristic impedance 50 ohms (Type SSMC
76IEC 60169-21-1985  (Radio-frequency connectors. Part 21 : Two types of radio-frequency connectors with inner diameter of outer conductor 9.5 mm (O.374 in) with different versions of screw coupling - Characteristic impedance 50 ohm
77IEC 60169-22-1985  (Radio-frequency connectors. Part 22 : R.F. two-pole bayonet coupled connectors for use with shielded balanced cables having twin inner conductors (Type BNO)
78IEC 60169-8-1978  (Radio-frequency connectors. Part 8 : R.F. coaxial connectors with inner diameter of outer conductor 6.5 mm (0.256 in) with bayonet lock - Characteristic impedance 50 ohms (Type BNC)
79IEC 60169-9-1978  (Radio-frequency connectors. Part 9 : R.F. coaxial connectors with inner diameter of outer conductor 3 mm (0.12 in) with screw coupling - Characteristic impedance 50 ohms (Type SMC)
80IEC 60169-24 Corrigendum 1-1995  (Radio-frequency connectors; part 24: radio-frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (type F)
81IEC 60169-27-1994  (Radio-frequency connectors; part 27: radio-frequency coaxial connectors with screw coupling, typically for use in 75 ohms cable distribution systems (type E)
82IEC 61009-2-1-1991  (Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO`s); part 2.1: applicability of the general rules to RCBO`s functionally indepe
83IEC 61009-1 Corrigendum 1-2003  (Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 1: General rules
84IEC 61009-1-1996  (Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 1: General rules
85IEC 60034-5 Corrigendum 1-2001  (Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code); Classification
86IEC 60034-7 AMD 1-2000  (Rotating electrical machines - Part 7: Classification of types of construction, mounting arrangements and terminal box position (IM Code); Amendment 1
87IEC 60034-7-1992  (Rotating electrical machines; part 7: classification of types of constructions and mounting arrangements (IM code)
88IEC 62026-5-2000  (SDS
89IEC 60747-16-10-2004  (Semiconductor devices - Part 16-10: Technology Approval Schedule (TAS) for monolithic microwave integrated circuits .
90IEC 60862-1-2003  (Surface acoustic wave (SAW) filters of assessed quality - Part 1: Generic specification
91IEC 61019-2-1995  (Surface acoustic wave (SAW) resonators - Part 2: Guide to the use
92IEC 61019-3-1991  (Surface acoustic wave (SAW) resonators; part 3: standard outlines and lead connections
93IEC 60669-2-2-1996  (Switches for household and similar fixed electrical installations - Part 2: Particular requirements - Section 2: Electromagnetic remote-control switches (RCS)
94IEC 60669-2-2 AMD 1-1997  (Switches for household and similar fixed electrical installations - Part 2: Particular requirements - Section 2: Electromagnetic remote-control switches (RCS); Amendment 1
95IEC 60669-2-3-1997  (Switches for household and similar fixed electrical installations - Part 2-3: Particular requirements - Time-delay switches (TDS)
96IEC 60870-6-2-1995  (Telecontrol equipment and systems - Part 6: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - Section 2: Use of basic standards (OSI layers 1-4)
97IEC 60700-1 Edition 1.1-2003  (Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing
98IEC 62040-1-2-2004  (Uninterruptible power systems (UPS) - Part 1-2: General and safety requirements for UPS used in restricted access locations
99IEC 62040-3 Corrigendum 1-2003  (Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements
100IEC 61146-2-1997  (Video cameras (PAL/SECAM/NTSC) - Methods of measurement - Part 2: Two- and three-sensor professional cameras
101IEC 61146-3-1997  (Video cameras (PAL/SECAM/NTSC) - Methods of measurements - Part 3: Non-broadcast camera-recorders
102IEC 60516-1975  A modular instrumentation system for data handling; CAMAC system
103IEC 60516 AMD 1-1984  A modular instrumentation system for data handling; CAMAC system
104IEC 60665-1980  A.C. electric ventilating fans and regulators for household and similar purposes
105IEC 60466 AMD 1-1994  A.C. insulation-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 38 kV; Amendment 1
106IEC 60466-1987  A.C. insulation-enclosed switchgear and controlgear for rated voltages above 1kV and up to and including 38 kV
107IEC 60298-1990  A.C. metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
108IEC 60298 AMD 1-1994  A.C. metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV; Amendment 1
109IEC 60252-1-2001  A.C. motor capacitors - Part 1: General; Performance, testing and rating; Safety requirements; Guide for installation and operation
110IEC 61643-321-2001  ABD
111IEC 61064-1991  Acceptance tests for steam turbine speed control systems
112IEC 60988-1990  Acoustic monitoring systems for loose parts detection; characteristics, design criteria and operational procedures
113IEC 61800-4-2002  Adjustable speed electrical power drive systems - Part 4: General requirements; Rating specifications for a.c. power drive systems above 1000 V a.c., and not exceeding 35 kV
114IEC 61800-5-1 Corrigendum 1-2003  Adjustable speed electrical power drive systems - Part 5-1: Safety requirements; Electrical, thermal and energy; Corrigendum 1
115IEC 61057 Corrigendum 1-1999  Aerial devices with insulating boom used for live working
116IEC 61134-1992  Airborne instrumentation for measurement of terrestrial gamma radiation
117IEC 60434 AMD 1-1981  Aircraft electrical filament lamps
118IEC 60434 AMD 2-1984  Aircraft electrical filament lamps
119IEC 60434-1973  Aircraft electrical filament lamps
120IEC 60839-10-1-1995  Alarm systems - Part 10: Alarm systems for road vehicles - Section 1: Passenger cars
121IEC 60839-2-7-1994  Alarm systems - Part 2: Requirements for intruder alarm systems; section 7: Passive glass-break detectors for use in buildings
122IEC 60839-7-1-2001  Alarm systems - Part 7-1: Message formats and protocols for serial data interfaces in alarm transmission systems; General
123IEC 60839-7-11-2001  Alarm systems - Part 7-11: Message formats and protocols for serial data interfaces in alarm transmission systems; Serial protocol for use by digital communicator systems using ITU-T Recommendation V.23 signalling at interfaces with the PSTN
124IEC 60839-7-12-2001  Alarm systems - Part 7-12: Message formats and protocols for serial data interfaces in alarm transmission systems; PTT interfaces for dedicated communications channels using ITU-T Recommendation V.23 signalling
125IEC 60839-7-2-2001  Alarm systems - Part 7-2: Message formats and protocols for serial data interfaces in alarm transmission systems; Common application layer protocol
126IEC 60839-7-20-2001  Alarm systems - Part 7-20: Message formats and protocols for serial data interfaces in alarm transmission systems; Terminal interfaces employing ITU-T recommendation V.24/V.28 signalling
127IEC 60839-7-3-2001  Alarm systems - Part 7-3: Message formats and protocols for serial data interfaces in alarm transmission systems; Common data link layer protocol
128IEC 60839-7-4-2001  Alarm systems - Part 7-4: Message formats and protocols for serial data interfaces in alarm transmission systems; Common transport layer protocol
129IEC 60839-7-5-2001  Alarm systems - Part 7-5: Message formats and protocols for serial data interfaces in alarm transmission systems; Alarm system interfaces employing a two-wire configuration in accordance with ISO/IEC 8482
130IEC 60839-7-6-2001  Alarm systems - Part 7-6: Message formats and protocols for serial data interfaces in alarm transmission systems; Alarm system interfaces employing ITU-T Recommendation V.24/V.28 signalling
131IEC 60839-7-7-2001  Alarm systems - Part 7-7: Message formats and protocols for serial data interfaces in alarm transmission systems; Alarm system interfaces for plug-in alarm system transceivers
132IEC 60839-1-3-1988  Alarm systems. Part 1: General requirements. Section Three - Environmental testing
133IEC 60839-1-2-1987  Alarm systems. Part 1: General requirements. Section Two - Power units, test methods and performance criteria.
134IEC 60839-2-3-1987  Alarm systems. Part 2: Requirements for intruder alarm systems. Section Three - Requirements for infrared-beam interruption dectors in buildings
135IEC 60839-2-2-1987  Alarm systems. Part 2: Requirements for intruder alarm systems. Section Two - Requirements for detectors - General.
136IEC 60839-1-4-1989  Alarm systems; part 1: general requirements; section four; code of practice
137IEC 60839-1-1-1988  Alarm systems; part 1: general requirements; section one: general
138IEC 60839-2-4-1990  Alarm systems; part 2: requirements for intruder alarm systems; section 4: ultrasonic doppler detectors for use in buildings
139IEC 60839-2-5-1990  Alarm systems; part 2: requirements for intruder alarm systems; section 5: microwave doppler detectors for use in buildings
140IEC 60839-2-6-1990  Alarm systems; part 2: requirements for intruder alarm systems; section six: passive infra-red detectors for use in buildings
141IEC 60839-5-1-1991  Alarm systems; part 5: requirements for alarm transmission systems; section 1: general requirements for systems
142IEC 60839-5-2-1991  Alarm systems; part 5: requirements for alarm transmission systems; section 2: general requirements for equipment
143IEC 60839-5-4-1991  Alarm systems; part 5: requirements for alarm transmission systems; section 4: alarm transmission systems using dedicated alarm transmission paths
144IEC 60839-5-5-1991  Alarm systems; part 5: requirements for alarm transmission systems; section 5: requirements for digital communicator systems using the public switched telephone network
145IEC 60839-5-6-1991  Alarm systems; part 5: requirements for alarm transmission systems; section 6: requirements for voice communicator systems using the public switched telephone network
146IEC 60285 Edition 3.2-1999  Alkaline secondary cells and batteries - Sealed nickel-cadmium cylindrical rechargeable single cells
147IEC 60285 AMD 1-1995  Alkaline secondary cells and batteries - Sealed nickel-cadmium cylindrical rechargeable single cells: Amendment 1
148IEC 60285 AMD 2-1998  Alkaline secondary cells and batteries - Sealed nickel-cadmium cylindrical rechargeable single cells; Amendment 2
149IEC 60104-1987  Aluminium-magnesium-silicon alloy wire for overhead line conductors.
150IEC 60320-2-3 AMD 1-2004  Amendment 1 - Appliance coupler for household and similar general purposes - Part 2-3: Appliance coupler with a degree of protection higher than IPX0 .
     Next Page
Order the standard:IEC
TEL: 86 10 88099016; FAX: 86 10 88097217; MSN: selina2ycx@hotmail.com

Sponsored Links
Chinese Translation Service
Documents Translation, Chinese-English
Language, Conference/Simultaneous Interpreter
Contact US: 86 10 8809 7400
E-mail: anny@hlyt.com
URL:http://www.hlyt.com/english/hlyt.htm

Engineering Project Service in China
Project Bidding, Information Service, Market
research, Quality Assurance Services, Non
Destructive Testing, Consultancy, Testing and
Training , R & D, Investing... IN CHINA
Contact ISQ-China: 86 10 8809 7217
E-mail: zxd@hlyt.com
URL:http://www.isq.pt
 
TEL: 86 10 8809 9016
MSN: gbstandard@hotmail.com
Chinese Standards Search  
 Chinese Version 

Copyright conserved by Chinese standard translation.net©1999-2008
Technology support by Beijing Hualian-Yatong Network Information Technology Co.,LTD
Tel£º86 10 88099016 88097400 Fax£º86 10 88097217
Address£ºRoom 1605, B Tower, SIGMA Building,
No.49 Zhichun Road, Haidian District, Beijing