TEL: 86 10 8809 9016
MSN: gbstandard@hotmail.com
Chinese Standards Search  
 Chinese Version 
Order the standard:HB
TEL: 86 10 88099016; FAX: 86 10 88097217; MSN: selina2ycx@hotmail.com
Home Page -- - -- A -- B -- C -- D -- E -- F -- G -- H -- I -- J -- K -- L -- M -- N -- O -- P -- Q -- R -- S -- T -- U -- V -- W -- X -- Y -- Z
No.

HB  Standards:
1HB 7722-2002  (100° flush head mechanical locked spindle and bulbed aluminum rivet)
2HB 7724-2002  (100°flush head mechanical locked spindle and bulbed steel rivet)
3HB 8005-2002  (120°countersunk head break mandrel blind rivets,in aluminummaterial)
4HB 8002-2002  (120°countersunk head break mandrel blind rivets,in stainless steel material)
5HB 1-602-2002  (120°countersunk head threaded rivets)
6HB 8040-2002  (120°raised countersunk head bolts with cross recess)
7HB 1-157-2002  (120°raised countersunk head bolts with cross recess,short thread)
8HB 8017-2002  (120°raised head bolts,shank tolerance h9,in titanium alloy)
9HB 10201-2001  (16th Edition of the Wiring Regulations - Guidance Note 3. Inspection and testing - 4th edition)
10HB 0-15-2003  (60°Reduce weight holes with bending rim)
11HB 1-130-2002  (90°countersunk bolts with cross recess)
12HB 1-133-2002  (90°countersunk bolts,short thread,shank tolerance h8)
13HB 1-134-2002  (90°countersunk head bolts with cross recess,shank tolerance f9)
14HB 1-132-2002  (90°countersunk head bolts with cross recess,shank tolerance f9)
15HB 8039-2002  (90°countersunk head bolts with recess,short thread tolerance p6)
16HB 8038-2002  (90°countersunk head bolts with recess,tolerance p6)
17HB 8016-2002  (90°countersunk head bolts,shank tolerance f9,in titanium alloy)
18HB 8004-2002  (90°countersunk head break mandrel blind rivets,in aluminum alloy material)
19HB 8065-2002  (90°countersunk head half crown rivet)
20HB 8034-2002  (90°countersunk head ladder bolts with MJ thread,slotted)
21HB 6304～HB 6314-2002  (90°countersunk head rivets)
22HB 1-206-2002  (90°countersunk head screw with cross recess)
23HB 8024-2002  (90°countersunk head screws in titanium alloy)
24HB 1-214-2002  (90°countersunk head screws with waisted shank)
25HB 8028-2002  (90°countersunk head screws,in nylon)
26HB 1-205-2002  (90°countersunk screws)
27HB 0-16-2003  (90°Reduce weight holes with bending rim)
28HB 8019-2002  (90°reduced countersunk head bolts,in titanium alloy for interferance fit)
29HB 8066-2002  (90°reduced countersunk head half crown rivet)
30HB 8013-2002  (collars,in aluminum alloy material)
31HB 8012-2002  (collars,in aluminum alloy material)
32HB 10200-2001  (IEE On-site Guide (BS 7671:2001, 16th edition Wiring Regulations)
33HB 8068-2002  (safty washer)
34HB 1-501-2002  (washers for cone bolts)
35HB 6803-1993  10000倍气动量仪用带定位台阶盲孔内径测量头(D＞14～30)
36HB 6802-1993  10000倍气动量仪用带定位台阶盲孔内径测量头(D≥8～14)
37HB 6799-1993  10000倍气动量仪用内径测量头(D＞10～18)
38HB 6800-1993  10000倍气动量仪用内径测量头(D＞18～24)
39HB 6801-1993  10000倍气动量仪用内径测量头(D＞24～40)
40HB 6798-1993  10000倍气动量仪用内径测量头(D＞3～10)
41HB 6811-1993  10000倍气动量仪用外径测量头(D＞18～30)
42HB 6812-1993  10000倍气动量仪用外径测量头(D＞30～40)
43HB 6810-1993  10000倍气动量仪用外径测量头(D＞6～18)
44HB 6785-1993  2000倍气动量仪用内径测量头(D＞10～18)
45HB 6786-1993  2000倍气动量仪用内径测量头(D＞18～24)
46HB 6787-1993  2000倍气动量仪用内径测量头(D＞24～65)
47HB 6788-1993  2000倍气动量仪用内径测量头(D＞65～80)
48HB 6804-1993  2000倍气动量仪用外径测量头(D＞10～18)
49HB 6805-1993  2000倍气动量仪用外径测量头(D＞18～30)
50HB 6806-1993  2000倍气动量仪用外径测量头(D＞50～80)
51HB 6797-1993  5000倍气动量仪用带定位台阶盲孔内径测量头(D＞14～30)
52HB 6796-1993  5000倍气动量仪用带定位台阶盲孔内径测量头(D≥8～14)
53HB 6795-1993  5000倍气动量仪用带定位台阶内径测量头(D＞14～30)
54HB 6794-1993  5000倍气动量仪用带定位台阶内径测量头(D≥8～14)
55HB 6790-1993  5000倍气动量仪用内径测量头(D＞10～18)
56HB 6791-1993  5000倍气动量仪用内径测量头(D＞18～24)
57HB 6792-1993  5000倍气动量仪用内径测量头(D＞24～65)
58HB 6789-1993  5000倍气动量仪用内径测量头(D＞3～10)
59HB 6793-1993  5000倍气动量仪用内径测量头(D＞65～80)
60HB 6808-1993  5000倍气动量仪用外径测量头(D＞18～30)
61HB 6809-1993  5000倍气动量仪用外径测量头(D＞30～80)
62HB 6807-1993  5000倍气动量仪用外径测量头(D＞6～18)
63HB 10145-1998  A Business Guide to the Year 2000
64HB 10129-1997  A Guide for IT Companies Seeking or Maintaining Registration to ISO 9001/9002
65HB 10129-1997  A Guide for IT Companies Seeking or Maintaining Registration to ISO 9001/9002
66HB 10203-2002  A Guide for the Adoption of ISO 9001:2000 for Industries within the Foodchain
67HB 10202-2002  A Guide for the Adoption of ISO 9001:2000 in Healthcare
68HB 10156-1998  A Project-by-project Approach to Quality
69HB 7717-2002  Acid etch inspection of grinding burn of steel parts for aviation
70HB 8070-2002  Angle
71HB 6354～HB 6355-2002  Angle tab washers
72HB 8069-2002  Angle with nuts
73HB 1-503-2002  Arc washers
74HB 1-502-2002  Arc washers for cone bolts
75HB 3-17-2002  Arched clamp fixed two-sided
76HB 6-61-2002  Arched clip and clamp fixed conducting wire
77HB 5859.4-2003  Aviation drawing Part 4:Assembly drawing brushwork
78HB 1-607-2002  Blind fastener internally threaded,external sleeve,alloy steel,120°countersunk head
79HB 8067-2002  Blind fastener internally threaded,external sleeve,alloy steel,90°countersunk head
80HB 1-604-2002  Blind fastener internally threaded,external sleeve,Alloy steel,hexagon head
81HB 10213-2001  Building Construction Handbook - Incorporating current building and construction regulations - 4th edition
82HB 8105-2002  Bush for landing gear
83HB 3-11-2002  Bushing
84HB 3-12-2002  Bushing for grade9
85HB 3-13-2002  Bushing for press-into
86HB 3-10-2002  Bushing with flange for press-into
87HB 4-69-2002  Cap,pressure seal,flared tube
88HB 8118-2002  Casing coupling conneting with electric wire
89HB 10215-2002  CDM Regulations - Procedures manual - 2nd edition
90HB 10215-2002  CDM Regulations - Procedures manual - 2nd edition
91HB 2-62-2002  Chain
92HB 0-50-2003  Chamfer and Ring Groove of Thread Hole
93HB 1-127-2002  Cheese head bolts with wire holes on head
94HB 1-203-2002  Cheese head screws with wire holes on head
95HB 1-213-2002  Cheese head,waisted shank bolts with wire holes on head
96HB 8286-2002  Circle spring clamp hoop
97HB 8092-2002  Clamp connecting conduit and accessories for air system
98HB 8094-2002  Clamp connecting conduit and accessories for high temperature and high pressure in air system
99HB 3-30-2002  Clamp for stainless steel band
100HB 3-23-2002  Clamp for tube
101HB 7711-2002  Clearances,the tyre and the adjacent parts of the aircraft,Design requirements for
102HB 10184-2001  Climate Change - A managerdanyihaos guide
103HB 10194-2001  Code of Practice for In-service Inspection and Testing of Electrical Equipment - 2nd edition
104HB 4-48-2002  Combination of swivel nut for flared tube Technical requirement
105HB 8147-2002  Compaction gasket,titianium alloy
106HB 0-18-2003  Concave bending rim
107HB 1-601-2002  Cone head threaded rivets
108HB 8114-2002  Connector
109HB 8226-2002  Control rod,locked with locking gasket Dangler tie-in with bearing
110HB 8228-2002  Control rod,locked with locking gasket Dangler tie-in withbearing
111HB 8230-2002  Control rod,locked with locking gasket Locking gasket
112HB 8225-2002  Control rod,locked with locking gasket Pole
113HB 8229-2002  Control rod,locked with locking gasket Tie-in withbush
114HB 8227-2002  Control rod,locked with locking gasket two dangler tie-ins with bearing
115HB 0-17-2003  Convex bending rim
116HB 8071-2002  Cover for fuel tank refuel
117HB 2-12-2002  Cover latch
118HB 7369-2002  Cross recesses
119HB 4-27-2002  Cross,D type,flared tube
120HB 4-28-2002  Cross,E type,flared tube
121HB 4-29-2002  Cross,F type flared tube
122HB 4-30-2002  Cross,screwed-onto, flared tube
123HB 8162-2002  Cross,titianium alloy,flared tube
124HB 8217～HB 8220-2002  Cross,with swivel nut,flared tube
125HB 6-21-2002  Cushion for instrument panel
126HB 7709-2002  Design requirements of mechanically fastened joint of composite structure for airplane
127HB 5965-2002  Dimensioning and technical requirements for the fir-tree connection
128HB 10185-2001  Eco-management Accounting
129HB 10196-2001  Effective Document Management - Unlocking corporate knowledge
130HB 10183-2001  Effective EMS Auditing
131HB 8169-2002  Elbow,90 degree,soldering tube
132HB 8132-2002  Elbow,90 degree,titianium alloy,flared tube
133HB 4-15-2002  Elbow,A type,90 degree,flared tube
134HB 4-10-2002  Elbow,B type,45 degree,flared tube
135HB 8142-2002  Elbow,B type,45 degree,titianium alloy,flared tube
136HB 4-14-2002  Elbow,B type,90 degree,flared tube
137HB 8134-2002  Elbow,B type,90 degree,titianium alloy,flared tube
138HB 4-11-2002  Elbow,C type,45 degree,flared tube
139HB 4-12-2002  Elbow,screwed-onto,45 degree,flared tube
140HB 8144-2002  Elbow,screwed-onto,45 degree,titianium alloy,flared tube
141HB 8138-2002  Elbow,screwed-onto,90 degree titianium alloy,flared tube
142HB 4-16-2002  Elbow,screwed-onto,90 degree,flared tube
143HB 8181～HB 8184-2002  Elbow,with swivel nut,60 degree,flared tube
144HB 8177～HB 8180-2002  Elbow,with swivel nut,90 degree,flared tube
145HB 10005-1995  Electrical Pocket Book
146HB 10193-2001  Electronics Engineersdanyihao Pocket Book - 2nd edition
147HB 10140-1997  EMS Handbook - A guide to the BS EN ISO 14000 series - 2nd edition
148HB 10114-1997  EMS)(ISO 14001 and Beyond: EMS in the real world
149HB 10186-2001  Engaging Employees - Environmental training and internal communication
150HB 10182-2001  Environmental Management Systems for SMEs
     Next Page
Order the standard:HB
TEL: 86 10 88099016; FAX: 86 10 88097217; MSN: selina2ycx@hotmail.com

Sponsored Links
Chinese Translation Service
Documents Translation, Chinese-English
Language, Conference/Simultaneous Interpreter
Contact US: 86 10 8809 7400
E-mail: anny@hlyt.com
URL:http://www.hlyt.com/english/hlyt.htm

Engineering Project Service in China
Project Bidding, Information Service, Market
research, Quality Assurance Services, Non
Destructive Testing, Consultancy, Testing and
Training , R & D, Investing... IN CHINA
Contact ISQ-China: 86 10 8809 7217
E-mail: zxd@hlyt.com
URL:http://www.isq.pt
 
TEL: 86 10 8809 9016
MSN: gbstandard@hotmail.com
Chinese Standards Search  
 Chinese Version 

Copyright conserved by Chinese standard translation.net©1999-2008
Technology support by Beijing Hualian-Yatong Network Information Technology Co.,LTD
Tel：86 10 88099016 88097400 Fax：86 10 88097217
Address：Room 1605, B Tower, SIGMA Building,
No.49 Zhichun Road, Haidian District, Beijing